Calumet Region N Scale Models: The Long View

On the bench: Island Model Works/Shapeways South Shore/NICTD Nippon Sharyo body shell (buy it here). A quick test shows it will fit on the Kato RDC drive with a bit of of judicious filing and fiddling. Will need some Faively-style pantographs and some decal-bashing in addition to silver paint and window glazing.

N scale models of prototypes from my home area--the Calumet Region of Northwest Indiana--keep turning up, and I keep adding them to my rolling stock roster.

Walthers updated and re-ran its N SW1200 earlier this year, and offered it in two different Calumet Region paint schemes: Indiana Harbor Belt and Elgin Joliet and Erie. I picked up the IHB version, and would pick up another road number and even the EJ&E version if one presented itself. The SW is a fine loco, but its DCC decoder installation is quite fussy owing to very tricky disassembly that can result in mangling vital pickup wipers. The IHB SW is an excellent complement to Bluford's IHB transfer caboose, two of which I also acquired.


Another N surprise turned up on the Island Model Works store on Shapeways, which is a South Shore/NICTD Nippon Sharyo coach shell. The actual Shapeways item is inexplicably called 'Nss Single 12-2016' but it is unmistakably a South Shore stainless steel coach. It appears to be scaled down from IMW's HO resin offering of this same car, construction of which has been covered here previously on Up Dunes Junction. A test fitting suggests the shell will fit with some fiddling and grinding over the Kato RDC drive. In particular, the interior features posts that extend from the roof down to a few millimeters or so shy of the of side bottom, suggesting it would fit on to a conventional floor as on the IMW HO version of this car. To fit on the thick Kato RDC drive, these interior posts will need to be shortened by another few millimeters.

Bluford IHB transfer caboose and Walthers IHB SW1200. The decoder install in the SW is a tight, difficult fit, but it is a good runner, no small feat in such a small, light locomotive.

An unexpected treat showed up during a visit to the monstrous Caboose Hobbies during a business trip to Denver, the Grasselli Interlocking Tower produced by Region Specific Models. Grasselli was a typical Northern Indiana interlocking tower in East Chicago. It has since been relocated to the Hoosier Valley Railroad Museum in North Judson, Indiana, where it will be restored. This kit is made from laser-cut craft board, and will actually be pretty tiny when completed--but iconic for its typical Calumet region look.

The RSM Grasselli kit, based on an iconic Indiana prototype.

In addition to the pictured Calumet Region models, kits, and parts, I have been patiently awaiting the arrival of several Intermountain EJ&E SD38s. These non-turbocharged road switchers were a constant presence in my childhood hometown of Dyer, Indiana, where the EJ&E (now CN) crossed the old Monon (later L&N, Family Lines, and currently CSX), and the throaty drum roll of these normally-aspirated EMDs became the first locomotives I could recognize by their sound. Apparently, Intermountain's run of SD38s has been stalled in the latest episode of Model Railroad Industrial Complex drama, the abrupt closing of the Affa model train factory in China. Apparently the patriarch of the Affa company up and retired, leading to the closure of the factory, although rumors and speculation about trade wars, tariff hikes, and the like have been running rampant in internet-based forums. Nonetheless, Model Railroad Industrial Complex insiders at Con-Cor and Rapido have provided separate but consistent accounts of how the Affa closure came to pass, and have assured that the ecosystem of Chinese model railroad manufacturers will pick up the slack over the next year. In the meantime, I will patiently await my order of SD38s.

Readers may be wondering: don't I already have an HO South Shore layout?  The whole point of my N scale sojourn and Old Line Corridor has been modeling Northeast Corridor prototypes that have been impractical to cover in HO, so why all the fuss over N scale models of Calumet Region prototypes?

For the moment, my focus will remain on NEC prototypes in N and Calumet Region, including the South Shore--in HO. But I'm thinking ahead to my future model railroading, where I anticipate time and resources for model railroading but maybe somewhat less space or more transitory space. My spouse and I are eyeballing our possible (retired) future without a large house--or even living between multiple smaller houses.

In other words, a portable, space-conscious approach to model railroading is likely to be in my future, perhaps even modular model railroading using the T-Trak, N-Trak, or Free-Mo standard. The modular approach would give me an opportunity to build some Calumet Region layout design elements, and provide an appropriate venue for running Calumet Region equipment.

Fortunately, I live in prime N scale module territory: our excellent local Northern Virginia NTrak (NVNTrak) club has both NTrak and T-Trak divisions. I'm looking forward to getting to know the  NVNTrak gang in the future, and modeling my favorite Calumet Region railroads.