Before embarking on forestation of the backdrop area (plantin' all those trees that have been going together over the past month or so), I wanted to put in Mineral Springs road.
 |
| Blair Line laser-cut wood crossings. They've been stained and test fit. |
But before Mineral Springs Road can go in, there needs to be a grade crossing. Previously, we test-fit and stained a Blair Line laser-cut wood crossing. Now the track underneath needs ballast in preparation for permanently mounting the wood crossings.
 |
| Highball HO limestone ballast on the track, glued down between the rails with Woodland Scenics Scenic Cement and on the roadbed shoulders with thinned Elmers White Glue. |
Over at Model Railroader magazine, Cody and Dave have been ballasting track on their Virginian project layout. Cody ballasts between the rails first, wets it down with alcohol and water using a pipette, and floods it all with Scenic Cement by Woodland Scenics. After that dries, he coats the shoulders of the roadbed with thinned white glue and sprinkles on a thin layer of ballast. When that thin layer is dry a day or so later and he vacuums up the excess, it provides good 'gription' for another, final layer of ballast that he pokes and prods and shapes with a little foam paint brush. That final layer then gets the wetting and Scenic Cement treatment.
 |
| A couple of layers of ballast, waiting for the glue to dry so all that excess can get vacuumed up. |
We're pretty much using Cody's technique here, with the added step(s) of building up some extra layers of ballast in that gutter in the roadbed on either side of the center track. I suppose I could have cut and glued in a couple of wedges of cork roadbed.
Check back in a couple of days when the Blair Line crossing is permanently mounted to the track and road building can commence.
